Agro Commodities & Agricultural Produts

5 Responses

1. N.C. Said,

   I purchased this meter about 2yrs. ago and it works fine. I think what the other neg. reviewers are failing to do even on brand new meters is to keep the probe clean, not just visually clean. These work off a chemical and electrical reaction if the probe has any oxidation which starts the minute after you clean the probe it varies or even blocks the electron flow, distorting or even blocking the reading entirely. With mine before I go to use it I pinch a peice of steel wool in my fingers and run it back and forth a couple times than wipe it clean. Do this and you’ll find very acurate and subtle changes in readings. You also don’t need to do all the soil prep as one reviewer said. Just collect and test watering run off from potted plants. If you want to test straight soil, yes the soil must be moist and you’ll learn to make the slight needed adjustments in readings with practice, no big deal. Keep in mind salt water conducts electricity better than fresh, it’s nearly the same principle as to why the directions what you to test mixed and dissolved soil. I did this once for acuracy and than acounted for the diffrence when I test straight into the potted soil with no prep. Do wipe probes inbetween test and maintain consistent probe depth. (Duh the more metal that’s in contact with the test medium soil/water the greater the flow of electrons will be and to the meter, effecting it.) I test my watering solutions and it is acurate enough that if the water is wavey hitting the probe at different hights the meter reads these subtle diffrences. In short great product especially under $15, you just have to be smarter than the meter.
   
   Rating: 5 / 5

   Posted on May 19th, 2010 at 4:09 am

2. Eric Spry Said,

   I bought one of these meters in 1987 (obviously not from here!) and am still using it today. I’ve had the same ‘problem’ other people have reported about the meter staying at 7, but it’s easy to solve.
   
   I use a small piece of 600 grit sandpaper to polish the probe prior to use. The readings are accurate every time. Just make sure the probe is bright and shiny (especially the tip), and it will work. If it’s not shiny, the readings will be sporadic, or it will just get stuck on a particular reading. It’s a very simple and affordable PH meter, that can obviously last a very long time!
   
   Rating: 5 / 5

   Posted on May 19th, 2010 at 6:12 am

3. jsn Said,

   I used this pH tester on my garden soil and always got a result of 7. Since I work in a laboratory I borrowed a few drops of pH standards (pH 4 and pH 7) and tested with this pH Meter. Both came up as 7. Hmmm! Don’t waste your money!
   Rating: 1 / 5

   Posted on May 19th, 2010 at 7:21 am

4. M. Herrmanns Said,

   This product works great. I was reluctant to buy it because others said it just keeps showing 7, but if you follow instructions and make sure the soil is wet, it works perfect. Be careful not to stick it in dirt that has a lot of rocks or you will scratch it.
   Rating: 5 / 5

   Posted on May 19th, 2010 at 9:21 am

5. Hans J. Kohlhoefer Said,

   I enjoy the use of this meter and it helps me to see what our water does to
   
   the soil. Our plants thrive in the proper ph and this meter gives me that skill.
   Rating: 5 / 5

   Posted on May 19th, 2010 at 9:24 am

Add A Comment

You must be logged in to post a comment.